Yes, by the City’s own 2024 testing. Every outlet and distribution reading we found in the City of Chicago’s 2024 Comprehensive Chemical Analysis sits between 130 and 146 mg/L as calcium carbonate, inside the band the USGS calls hard. That describes four sampling rounds in 2024, not your tap and not 2026: the City lists newer reports that our tools could not open, so check those before you rely on a number.
What the City measured
The City’s Department of Water Management posts its Comprehensive Chemical Analysis reports by year. The 2024 report runs two pages per quarter. The first page of each quarter carries the hardness row and covers both of the City’s plants, the South Water Purification Plant and the Jardine Water Purification Plant. The City’s server returned an error to our tools when we requested the file, so we read it from a public web archive copy captured August 15, 2025, and checked the hardness row on each quarter’s first page by eye. The unit is “as CaCO3, mg/L”, the same unit as the USGS bands below, so nothing needs converting.
| 2024 round and sample dates | South distribution | Jardine distribution, Central | Jardine distribution, North |
|---|---|---|---|
| First quarter, February 5 to 7 | 143 | 142 | 140 |
| Second quarter, April 1 to 3 | 144 | 144 | 145 |
| Third quarter, August 5 to 7 | 130 | 132 | 134 |
| Fourth quarter, October 7 to 9 | 138 | 138 | 137 |
Hardness as CaCO3 in mg/L, as the City prints it. The sheets’ footnote reads “Distribution samples results are averages”. The plants’ outlet columns on the same sheets read 132 to 146 across the four rounds. We left out the raw lake-water columns, which are the untreated source water and not what reaches a tap. Sample dates within a round fall a day or two apart, so the table gives each round’s window.
Where that falls on the hardness scale
The USGS Water Science School gives the usual bands: “0 to 60 mg/L (milligrams per liter) as calcium carbonate is classified as soft; 61 to 120 mg/L as moderately hard; 121 to 180 mg/L as hard; and more than 180 mg/L as very hard.” Every outlet and distribution figure on the four 2024 sheets, 130 to 146 mg/L, is inside the hard band, and none comes near the more than 180 mg/L that the USGS calls very hard.
What four rounds cannot tell you
Our reading: within each round the three distribution figures differ by at most 4 mg/L (by 3, 1, 4 and 1 in the four rounds). So on these sheets the South and Jardine distribution readings sit close together. That is all they show.
Here is what they do not show. They are not a reading from a household tap, and each is a snapshot of a few days, not a yearly average. The printed columns carry the labels South, Central and North, not street addresses, so the sheets cannot tell you which plant’s water reaches your block. The first quarter’s hardness row is labelled EDTA and the other three are labelled calculated, so a difference of a few mg/L between rounds is not evidence of a season or a trend. And they are from 2024: the City’s page also lists a 2025 report and a report for the first two quarters of 2026, which our tools could not open. If your water comes from a different utility, read that utility’s own report.
How to check the City’s newer report yourself
Open the City’s page linked above and choose the newest file. On the 2024 sheets, hardness is one row in a long column of parameters, between sulfate and calcium. The file is a scan, so our tools found no text to search; read down the row labels instead. Look for the same row and the same unit, mg/L as CaCO3, in a newer file so you compare like with like, then place the number against the USGS bands above. Treat it as the City’s sampling of its own water, not a measurement of your pipes.
What hard water does, and what it cannot tell you about your bathroom
The USGS ties hard water to two things you might see at home. Soap: “In hard water, soap reacts with the calcium (which is relatively high in hard water) to form ‘soap scum’.” And heat: “When hard water is heated, such as in a home water heater, solid deposits of calcium carbonate can form.” A hard reading from the City makes either one plausible in a Chicago bathroom. It cannot tell you which one is on your shower door or faucet, or whether a mark is a deposit at all.
Before you buy a descaler
Our reading. The City’s number answers one question, how hard the water is. It does not answer what your surface can take, so work in this order:
- Name each surface you mean to treat: glazed tile, glass, chrome, a coated finish, natural stone. We cannot see your bathroom, so this step is yours.
- Find the care instructions from whoever made or sold that surface, and read them before you read a product label. If the two disagree, the maker of your surface is the one who knows what it tolerates.
- If any surface is natural stone, read the Natural Stone Institute’s care page. It says: “Calcareous stone is composed mainly of calcium carbonate, a chemical compound commonly found in natural stone, shells and pearls.” It also says: “Products containing lemon, vinegar or other acids may dull or etch calcareous stones.” And: “Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water.” Calcium carbonate is also the compound the USGS names in hard-water deposits, which is why a descaler question can be a stone question in a bathroom with stone in it. The Institute’s page is about natural stone only, and we do not stretch it to glass, chrome or coatings.
- Treat the City’s figures as a starting question. The USGS’s own caveat on its national hardness map is that “information that is directly relevant to water hardness and other chemical properties at a home or immediate locale should be provided by the local health agency or local water utility, or by the vendor of a local water-softening system.” For a softener we have no view: we do not sell or recommend one.
What a Hometress visit lists for the bathroom
Hometress takes online bookings only in Philadelphia today, and the checklists below are the ones published for those bookings. Nothing here promises a visit at a Chicago address. The Standard Regular Cleaning list has “Clean Showerhead, Faucets, and Handles” and “Clean Sink Bowl, Faucet And Drains”. The Standard Deep Cleaning list adds “Deeply Scrub & Disinfect Bathtub / Showerhead”. Only the top list, Dream Home Cleaning, has “Attempt Removal of Rust, Lime, or Calcium”, and the word is attempt, not a promise. None of the lists names shower glass. Our guide to cleaning a Chicago greystone or two-flat covers the older-home side of Chicago cleaning.
If you live in Chicago, you can join the Chicago waitlist. The Chicago page also says: “Call or message us now. We’ll tell you what we can do for your address in Chicago.”
Common questions
Is Chicago tap water hard?
By the City’s 2024 sheets and the USGS scale, yes. Outlet and distribution readings ran from 130 to 146 mg/L, against a hard band of 121 to 180. Those are 2024 samples from the plants and the distribution system, not your tap, so look at the City’s newer reports too.
Is the film on my shower door limescale if the water is hard?
A hard reading makes mineral deposits plausible, and the USGS also names soap scum. We cannot see your glass and have not tested your water, so the City’s figures cannot settle it. Check the maker’s care instructions for the surface before you choose a product.
Do I need a water softener in Chicago?
We do not sell or recommend one. Start from the City’s current report, or your own utility’s if it is not the City.
